CELL PHONE CASES 1
With these 3 sets you can create cell phone cases entirely in the hoop. Except for the 4x4 size. On the 4x4 hoop set you will only need to extend the side seams on your regular sewing machine. All the rest is done in the hoop. For the Jumbo and 5X7 size there is no other stitching needed. They are fully padded. Also all done in the hoop. Each set have two styles. One with a notch for the antenna and one with out. Full detailed step by step instructions included with each set. There is also a Picture Instruction page to see step by step pictures to make them even easier.
*****Each size is sold separately or buy all 3 sizes for $25.00*****
•
JUMBO
This set is for the 160 X 260 Jumbo hoop. The actual design size is 94.60X206.30mm. The finished size of the case is 3"wide by 6" long. These can also be used for eyeglass cases. Each design comes in both styles for a total of 6 different cases.
MEDIUM
This set is for the 5x7 hoops. The actual design size is 92.30 X 176.40mm. The finished size of the case is 3" wide by 5 1/4". Each design comes in both styles for a total of 6 different cases.
Above shows the notch for the antenna. The phone on the right measures 1.7 wide by .9" deep. There is still room to spare. All the cases have the same size opening.
SMALL
This set is for the 4X4 hoops. The actual design size is 92.30X 98mm. The case size is 3" wide by any size you want. With this set you will need to extend the seams on your regular sewing machine. All of the top, flaps velcro and top seams are done in the hoop. You can custom make the length with this set. These will be made in two hoopings. First the motif is stitched on one piece of fabric. Then the rest of the case is stitched in the second hooping.
Above shows the variation of sizes you can make with this set. All 3 of the designs shown on the other sizes are also included with this set as well as both styles of cases. You can make the cases big enough for eyeglasses with this set too!