NOTE HOLDERS 3
This set is for the jumbo 6x10" or D1 hoops.
Actual design size is139.30X238.30mm.
Make this notepad holder entirely in the hoop. No other sewing required. Holds the popular 3 1/2 X 8" notepads. Also has a pocket for a pen or pencil so it's always handy. Very easy to make. It's just a series of positioning pieces of fabric over stitched guidelines. Stitch, unhoop, trim and turn right side out. All you will need to do is fuse the opening closed and glue a magnet sheet to the back. Used printed fabrics for super quick holders. Make one for every holiday with holiday printed fabrics!
All sets are $10.00 or any 3 design sets on my site $25.00
•
The cardboard back of the pad slips into the top pocket.
Use printed fabrics for really quick holders. You can use all one fabric or use coordinating fabrics.
Above show the little pocket at the bottom to hold the pages. I suggest inserting about half of the pages into the little bottom pocket to support the pad and hold in in place.
Glue a piece of magnet sheet to the back and your all finished.
All the motifs on the Note Holders also come as separate files so you can use them on other projects too.
Click on the flower above to download a sample.
CUSTOMER PROJECTS
Arlene made the two below using fabric to coordinate with the notepads. Just an example of what can be done with this project.
